No.1    Repair process  维修流程





(1)Take videos and photos 拍摄视频和照片(Wechat sending 微信发送)




(2)Express delivery of accordion 手风琴快递(Express insurance 快递保价)




(3)Hand deliver accordion 亲自送达(Take videos and photos on the spot 本人现场拍摄)




(4)Receiving 接受(shooting again 再次拍摄)




(5)Wechat accepts billing(微信接受开单)




(6)Wechat speech confirmation(微信讲话确认)




(7)Send to factory for inspection 送厂检验( Send Report 发送报告)



(8) Send maintenance fee 客观报价



   a、Accept the price 接受报价( full payment 全额付款)。



   b、Refuse to repair 拒绝维修(Pay to express 快递到付,Appointment for accordion 预约取手风琴 )。




(9) Wechat maintenance agreement  维修协议




(10) Wechat speech confirmation(微信讲话确认)




(11)Appointment for accordion 预约取琴(Video Photo comparison 视频照片比对)




(12)Pay to express (Customer Video Photo comparison 客户视频照片比对)







No.2   remarks:




(1)Take a close-up high-definition video or photos 近距离高清晰拍摄一下视频或照片



(2)The specific source of accordion failure must be pointed out 指出手风琴故障的具体出处。



(3)Just play a single tone 拉单音即可。Don't play scales 不要演奏音阶、Arpeggio 琶音、song 曲目。



(4)Accordion maintenance technicians (blue collar) in western countries are scarce.  



the maintenance cost is huge, and the maintenance price is several times higher than that in China.





No.3   16 methoods of Accordion machine maintenance by Su Xing








No.4  Muandim,German,Hohner Accordion








No.5  Accordion Repair Order



[1]  video shot close up. video time 5 minutes. Bellows failure,only pull bellows.other failures, only play single tone.  Don't show your face.



[2]  at video time,  dictating your location,purchase time, brand model, whether maintenance, fault source and the cause of the general situation. 



[3]  Don't Dictation, Don't make a sound video or send a picture only, all be regarded as invalid. Oral video will serve as an important reference for formal maintenance.



[4] SCOPE of repair undertaken


Last century


Accordion at home and abroad



This century


Foreign Accordion, Partial brand Accordion and  domestic Accordion. 



[5] Don't answer the self-demolited consultation,  Don't  accept self-demolition inspection. Don't  sell accessory parts. 
it will be blacklisted such as calls, voicemails, pictures, breaking in without an appointment, and other harassment。Information will keep for 3 days.    later inquires, need to re-send the video. Please know. 


[6] relevant professional knowledge (anti-virus, no retweeting).  Input shyyd.com website at  BaiDu. 
Enter and search on 18 professional independent website by clicking on the Navigation Bar 





No.6   Accordion Maintenance Service 



[1] don't entrust others,if you can deliver it yourself. 



[2] Reception time 14:00 pm.  several maintenance points can be parked. accordian delivery by hand (or express delivery). Don't accept the repair business of dismantled parts.



[3] three days before the notification. the departure (express) 6 hours before reconfirmation. Departure (express) immediate verification, confirmation of mutual information.





WECHAT PHONE: 189-1702-0116










No.7    Manufacturing process  of  diatonic  accordian(全音阶手风琴)




Well,A diatonic accordion is much smaller than a piano accordion.And it's   structually different.    It has ten buttons,each of which produces two notes.One when you push the   bellows in,the other when you pull the bellows out.   The diatonioaccordion,also called the squeeze box  is astaple of Cajun(French descent) music.  


The accordion maker crest the right hand key board from the Maple which is a  hardwood.   Workshop worker saws ten slots,then drills ten holes.The keyboard has no keys  actuially.it has only ten buttons.They produce the triplet notes.


After that, the worker must turns the keybord over  and hollows out the wood   with a router.   This creates space for components to move.Each slot in the keyboard will  housearocker,a piece that links each button to its corresponding airvalve.


then  technician of the Accordion bellows builds the wind chest.the box that  houses the steelreeds.that  produce the accordiance sound.


Moving the bellows in and out,forces air through holes in the wind chest,The   buttons you pushed determine,which reeds get this air, producing notes.   The  longer and thicker the reed,the slower it vibrate,and the lower the pitch of   the note.


a similar way , the shorter and thinner the reed,the faster the vibrate  and  the higher the note.   There are eight reeds per  button,pushing the bellows in activates four,pulling    the bellows out the other four.   Using  a  hot iron,theaccordion maker seals thereed frames with beeswax.  This   prevents air from escaping. 


Now back  to the keyboard.The accordian maker installs ten valves  made of  maple wood.Each one hasa plastic rocker on the end. A spring  ensures the  rocker has just the right  push-buttons to open  and close the vaulve properly   when the musician  presses  the button.


Afterstaining and varnishing the wood, he glues a button  into  each hole onto  the rocker inside.  Pressing abutton triggers the rocker underneat,to lift the  valve  and uncover   the   air   hole,  letting  air hit the designated reeds.   The accordian maker now screws the fuilly  assembled keyboard to  the wind  chest. 


Now the technician constructs the left hand keyboard.  the technician  sets  the reeds into the left wind chest,using a hot  iron  and  bee's waxs(蜂蜡)  just like before  The  valves(风门板) in this keyboard are made  of pine ,a more  flexible wood, making them easier to install in this enclosed space.


On  the  outside,  a  decorative  wood  inlay,a  strip  of ebony  and  some  rose wood detailing. The left hand keyboard has two buttons  corresponding to  three reeds each.It produces two base notes and two cords.


After  staining and varnishing the keyboard, the technician  hooks a spring  between each vaulve and the button that operates it.  the technician  adjusts  the spring tention and checks the air tightness of accordion.


Then he stamps the company name inside.Now the technician  screws the finished  keyboard to the finished windchest.Meanwhile, another technician , prepares  the bellows  which forces air through the reeds. 


our factory buys prefolded cardboard, then cuts and assembles it.These  diamond-shaped pieces of leather, seal the openings, preventing air from  escaping. 


Now the technician  glues fabric strips inside the folds of the  cardboard .This is purely for decoration. These stainless steel covers  reinforce the carboard corners.so that they won't perforate from repeated  movement.


Now the technician  glues fabric strips unto the edges of  the folders.This  both decorates and strenghthens the cardboard.  Now for the final assembly. The accordian maker nails the bellows to the left  hand keyboard.Why nails rather than screws? that's largely because tradition.


The  left hand keyboard has a hand strap.The right hand keyboard, a thumb  strap.  After nailing the right hand keyboard to the rest.


this  880 dollar  diatonicaccordian(全音阶手风琴) is ready for a piece of  music.


If you're interested in making accordion,You can visit our accordion factory.You're always welcome here.